Mold Star 31T
- SKU:
- Mold Star 31T - 2lb
NOTE:
- Prices are subject to change without notice.
- Products may be subject to back order.
- All prices are subject to applicable taxes.
- Seasonal weather events and other disruptions may occur and cause delays for inbound and outbound shipments. We are not responsible for shipping delays due to weather and roads being closed.
Product Overview
Mold Star™ 31T is an easy to use Shore 30A translucent platinum silicone that is mixed 1A:1B by volume (no weighing scale necessary). It features a relatively low viscosity and vacuum degassing is not required for most applications. Pot life is 5 minutes and cure time is 23 minutes at room temperature.
Features
Mold Star™ 31T cures in to a soft, strong rubber that is tear resistant and exhibits very low long term shrinkage. Molds made with Mold Star™ will last a long time in your mold library and are good for casting wax, gypsum, resins, and other materials. An infinite number of color effects can be achieved by adding Silc Pig™ silicone pigments or Cast Magic™ effects powders.
Mold Star™ 31T is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
Cured Mold Star™ 19T, 20T and 31T silicones have been tested and certified skin safe by an independent laboratory.
Note: This product will not cure against surfaces containing sulfur, even when sealed.
Product Videos
**Images may not be representative of actual product packaging, etc.